TY  - SER
AU  - A. N. Tarawneh
AU  - A. M Alghossoon
AU  - G. S. Almasabha
AU  - O. S. Alajarmeh
AU  - A. Manalo
AU  - B. Benmokrane
AU  - E. F. Saleh
TI  - Modified Shear Design Model for Steel- and Fiber- Reinforced Polymer-Reinforced Concrete Beams
SN  - 0889-3241
KW  - ACI 440
KW  - Axial Stiffness
KW  - Code Evaluation
KW  - Fiber-Reinforced Polymer (FRP)-Reinforced Concrete (RC) Beams
KW  - Fiber-Reinforced Polymer (FRP) Reinforcement
KW  - Reliability Analysis
KW  - Shear Strength
KW  - Steel-Reinforced Concrete Beams
KW  - Steel Reinforcement
N2  - This study proposes a unified shear design provision for slender steel- and fiber-reinforced polymer (FRP)-reinforced concrete (RC) members. The proposed model is a modification of the ACI 318-19 model to include the axial stiffness of the longitudinal reinforcement by introducing a new modification term, nc, representing the elastic modular ratio of the longitudinal reinforcement to the concrete. The new relation is Vc = (0.4 [nc ρfl]1/3 λ s√fcꞌ + Nu/[6Ag])bwd. The unified shear model was assessed with five experimental data sets: FRP-RC beams without shear reinforcement (288 beams), steel-RC beams without shear reinforcement (759 beams), FRP-RC beams with shear reinforcement (56 beams), steel-RC beams with shear reinforcement (157 beams), and steel-RC beams with axial force (prestressed) but without shear reinforcement (209 beams). The unified shear model provided better performance than the ACI 318-19 and ACI CODE-440.11-22 provisions in terms of mean, coefficient of variation, standard deviation (SD), and absolute average error (AAE). The unified model also showed improved performance over a wider range of material properties. In addition, reliability analysis using Monte Carlo simulation indicated that the unified shear model provides a consistent satisfactory safety level with a reliability index between 3.5 and 4.0 for both steel- and FRP-RC members. The reliability index provided by the unified model is similar to the reliability index provided by the ACI 318-19 shear provision. In contrast, the ACI CODE-440.11-22 results in highly conservative estimates with a reliability index between 4.5 and 5.0
UR  - DOI:10.14359/51739191
ER  -